TVC5400 | 5U Video Wall Controller | 17 Video Controller Cards | Single Board Computer (TVC5400)

TVC5400

The TVC5400 5U video controller supports up to seventeen video controller boards used in advanced display wall applications with large data storage requirements.  The TVC5400 features a variety of single board computer and backplane options including Trenton's TSB7053 SBC and BPG8032 PCI Express 2.0 backplane. This video controller supports up to eight front access / hot swap storage drives and an N+1 system power supply.

The following CPUs are available for use with the TSB7053 SBC option:
Intel® Xeon® E3-1275 Processor - Quad core, 3.4GHz with Hyper-Threading, 8MB cache
Intel® Xeon® E3-1225 Processor - Quad core, 3.1GHz without Hyper-Threading, 6MB cache
Intel® Core™ i3-2120  Processor - Dual core, 3.3GHz with Hyper-Threading, 3MB cache

These long-life, advanced server, Sandy Bridge processors feature a 2.5GT/s DMI interface to the board's C206 PCH, an 800MHz integrated graphics frequency and support Intel® AMT 7.0 system applications.

The following CPUs are available for use with JXT6966 or JXTS6966 SBC options:
Intel® Xeon® EC5549 Processor - Quad core, 2.53GHz with Hyper-Threading, 8MB cache
Intel® Xeon® EC5539 Processor - Dual core, 2.27GHz without Hyper-Threading, 4MB cache
Intel® Xeon® EC5509 Processor - Quad core, 2.0GHz  without Hyper-Threading, 8MB cache
Intel® Xeon® LC5528 Processor - Quad core, 2.13GHz with Hyper-Threading, 8MB cache

Consult Trenton for additional processor options.

The Trenton BPG8032 is a featured 20-slot backplane option for the TVC5400 video controller.  This backplane supports one single-processor PICMG 1.3 SHB such as the TSB7053, or a dual-processor SBC like the JXT6966 and up to seventeen PCI Express Gen 2.0 video, graphics or network communications option cards.  An aditional x16 mechanical card slot is driven with a x4 PCIe link from the TSB7053 system host board and can be used to support general purpose I/O cards. PCIe Gen 2 or 1.1 option cards are also supported in the TVC5400.  All eighteen option card slots use x16 PCIe mechanical connectors with seventeen of these slots driven with x16 PCI Express electrical interfaces.

Backplane Type: PICMG 1.3 Graphics-Class
Option Card Slots:  Seventeen PCIe x16 electrical and one PCIe x4 electrical slots (all slots use x16 PCIe mechanical connectors)

Note 1:  Backplane slots PCIe2 through PCIe18 may operate as PCIe 2.0 slots depending on the end point devices installed into these slots and regardless of the system host board x16 root link type.

Note 2:  Backplane slot PCIe1 operates as x4 link and either as a PCIe 2.0 or 1.1 interface slot when using an SHB such as the TSB7053.

Note 3:  Backplane slot PCIe1 operates as x1 link and a PCIe 1.1 interface slot when using an SHB such as the JXT6966 or JXTS6966.

EIA RS-310C 19” Rackmount Standard

Lightweight, rugged aluminum

Black

19" Rackmount Video Controller, 5U enclosure height, one single board computer with a 20-slot backplane in a lightweight, rugged aluminum enclosure with and N+1 power supply, four front access HDD drive carriers, two internal drive storage bays, a slim-line optical drive, front panel USB ports with rear panel I/O ports and PCI Express 2.0 option card slots

The SBC and 20-slot backplane combination supports up to seventeen, x16 PCI Express video controller boards.

4 - Front removable and hot swap 3.5” drive bays support up to eight 2.5" HDD carriers and 1 - Slim-line device bay for optical drive media

1500W, N + 1 redundant with automatic fail over

4 - 120mm Fans (center-mounted), 90 CFM each

LEDs for HDD activity and Power Status

Front: 2 USB

Rear: 2 - Ethernet LANs, 2 - USB and 1 - VGA Video, 18 - Option Card Slots

Power On/Off and System Reset

48.26cm (W) x 22.23cm (H) x 58.42cm (D) (with 19" rackmount handles installed)

19.0" (W) x 8.75” (H) x 23.0” (D) (with 19" rackmount handles installed)